您的位置：
Lexan EXL9330 嘉博塑化有限公司专业销Lexan EXL9330沙伯根本立异塑料PC原厂原包江浙沪一级代办署理 质量包管.品种齐备.诚信经营.老少无欺.接待来电咨询订购 原厂原包Lexan EXL9330沙伯根本立异塑料江浙沪一级代办署理/PC简介 LEXAN由双酚A制造，为聚碳酸脂这高份子材料，具有**的高透明和耐热温度，和热可塑性树脂中的冲击强度，杰出的成型性使得“LEXAN”用在汽车零组件、事务机械、家电产物、电子产物、电子零件、食物用具、医疗器材和通讯装备之替换金属用品上，的选择材料。 Lexan PC EXL9330物性表 -60℃延展性,紫外不变.耐燃性V-0/5VA. 非卤化,不含溴。 Opaque PC-Siloxane copolymer with excellent processability. Non-chlorinated, non-brominated flame retardant product. UV-stabilized. UL rated f1/V-0/5VA. Property/特征 MECHANICAL/机械机能 Tensile Stress, yld, Type I / 抗张水平,屈就,类型I, 50 mm/min 58 MPa ASTM D 638 Tensile Stress, brk, Type I / 抗张水平,断裂,类型I, 50 mm/min 61 MPa ASTM D 638 Tensile Strain, yld, Type I / 拉伸伸长,屈就,类型I, 50 mm/min 6 % ASTM D 638 Tensile Strain, brk, Type I / 拉伸伸长,断裂,类型I, 50 mm/min 130 % ASTM D 638 Tensile Modulus / 拉伸模量, 50 mm/min 2100 MPa ASTM D 638 Flexural Stress, yld / 挠曲强度, 屈就 , 1.3 mm/min, 50 mm span 88 MPa ASTM D 790 Flexural Modulus / 挠曲模量, 1.3 mm/min, 50 mm span 2060 MPa ASTM D 790 Tensile Stress, yield / 抗张水平,屈就, 50 mm/min 55 MPa ISO 527 Tensile Stress, break / 抗张水平,断裂, 50 mm/min 60 MPa ISO 527 Tensile Strain, yield / 拉伸伸长,屈就, 50 mm/min 6 % ISO 527 Tensile Strain, break / 拉伸伸长,断裂, 50 mm/min 125 % ISO 527 Tensile Modulus / 拉伸模量, 1 mm/min 2100 MPa ISO 527 Flexural Stress, yield / 曲折强度,屈就, 2 mm/min 85 MPa ISO 178 Flexural Modulus / 挠曲模量, 2 mm/min 2200 MPa ISO 178 Hardness / 硬度, H358/30 90 MPa ISO 2039-1 IMPACT/冲击机能 Izod Impact, notched / 悬臂梁缺口冲击强度, 23°C 801 J/m ASTM D 256 Izod Impact, notched / 悬臂梁缺口冲击强度, -30°C 678 J/m ASTM D 256 Izod Impact, notched / 悬臂梁缺口冲击强度, -50°C 587 J/m ASTM D 256 Izod Impact, notched / 悬臂梁缺口冲击强度, 23°C, 6.4mm 640 J/m ASTM D 256 Izod Impact, double-gated, 23°C 1068 J/m SABIC Method Instrumented IMPACT Total Energy / 装有丈量仪表的落镖冲击总能量, 23°C 52 J ASTM D 3763 Izod Impact, unnotched / 无缺口悬臂梁冲击 80*10*3 23°C NB kJ/m² ISO 180/1U Izod Impact, unnotched / 无缺口悬臂梁冲击 80*10*3 -30°C NB kJ/m² ISO 180/1U Izod Impact, notched / 悬臂梁缺口冲击强度 80*10*3 23°C 70 kJ/m² ISO 180/1A Izod Impact, notched / 悬臂梁缺口冲击强度 80*10*3 -30°C 55 kJ/m² ISO 180/1A Izod Impact, notched / 悬臂梁缺口冲击强度 63.5*12.7*3.2, 23°C 80 kJ/m² ISO 180/4A Izod Impact, notched / 悬臂梁缺口冲击强度 63.5*12.7*3.2, -30°C 65 kJ/m² ISO 180/4A Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm 75 kJ/m² ISO 179/1eA Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm 60 kJ/m² ISO 179/1eA Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm NB kJ/m² ISO 179/1eU Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm NB kJ/m² ISO 179/1eU THERMAL/热机能 Vicat Softening Temp, Rate / 维卡软化温度，品级 B/50 142 °C ASTM D 1525 HDT, 0.45 MPa, 3.2 mm, unannealed 134 °C ASTM D 648 HDT, 1.82 MPa, 3.2mm, unannealed 120 °C ASTM D 648 HDT, 1.82 MPa, 6.4 mm, unannealed 124 °C ASTM D 648 CTE, -40°C to 40°C, flow 6.66E-05 1/°C ASTM E 831 CTE, -40°C to 40°C, xflow 6.66E-05 1/°C ASTM E 831 CTE, 23°C to 80°C, flow 7.2E-05 1/°C ISO 11359-2 CTE, 23°C to 80°C, xflow 7.7E-05 1/°C ISO 11359-2 Ball Pressure Test, 125°C /- 2°C PASSES – IEC 60695-10-2 Vicat Softening Temp, Rate / 维卡软化温度，品级 B/50 140 °C ISO 306 Vicat Softening Temp, Rate / 维卡软化温度，品级 B/120 142 °C ISO 306 HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 135 °C ISO 75/Be HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 124 °C ISO 75/Ae Relative Temp Index, Elec / 相对热指数， 电机能 125 °C UL 746B Relative Temp Index, Mech w/impact / 相对热指数，机械冲击机能 115 °C UL 746B Relative Temp Index, Mech w/o impact / 相对热指数，非机械冲击机能 120 °C UL 746B PHYSICAL/物理机能 Specific Gravity / 比重 1.18 – ASTM D 792 Mold Shrinkage / 缩短率, flow, 3.2 mm 0.4 – 0.8 % SABIC Method Mold Shrinkage / 缩短率, xflow, 3.2 mm 0.4 – 0.8 % SABIC Method Melt Flow Rate / 熔流率 300°C/1.2 kgf 10 g/10 min ASTM D 1238 Density / 密度 1.19 g/cm³ ISO 1183 Water Absorption / 吸水率, 0.35 % ISO 62 Moisture Absorption / 吸水率, 均衡 0.15 % ISO 62 Melt Volume Rate / 熔解体积流率, MVR at 300°C/1.2 kg 9 cm³/10 min ISO 1133 ELECTRICAL/电气机能 Dielectric Strength, in oil / 耐电强度，在油中, 3.2 mm 17 kV/mm ASTM D 149 Relative Permittivity / 相对介电常数, 50/60 Hz 2.95 – ASTM D 150 Relative Permittivity / 相对介电常数, 1 MHz 2.9 – ASTM D 150 Dissipation Factor / 耗散身分, 50/60 Hz 0.0024 – ASTM D 150 Dissipation Factor / 耗散身分, 1 MHz 0.0085 – ASTM D 150 Hot Wire Ignition / 热丝引燃 {PLC) 1 PLC Code UL 746A High Ampere Arc Ign, surface / 高电流电弧引燃，概况 {PLC} 0 PLC Code UL 746A Comparative Tracking Index / 比拟耐漏电起痕指数 {PLC} 3 PLC Code UL 746A Volume Resistivity / 体积电阻率 1.E 15 Ohm-cm IEC 60093 Surface Resistivity ROA / 概况电阻率 1.E 15 Ohm IEC 60093 Dielectric Strength, in oil / 耐电强度，在油中, 3.2 mm 16 kV/mm IEC 60243-1 Relative Permittivity / 相对介电常数, 50/60 Hz 2.6 – IEC 60250 Relative Permittivity / 相对介电常数, 1 MHz 2.7 – IEC 60250 Dissipation Factor / 耗散身分, 50/60 Hz 0.001 – IEC 60250 Dissipation Factor / 耗散身分, 1 MHz 0.0085 – IEC 60250 Comparative Tracking Index / 比拟耐漏电起痕指数 225 V IEC 60112 FLAME CHARACTERISTICS/火焰特征 UL Recognized, 94V-0 Flame Class Rating / 阻燃品级 1.49 mm UL 94 UL Recognized, 94-5VA Rating 2.99 mm UL 94 Glow Wire Flammability Index / 炽热丝易燃指数 960°C, passes at 1 mm IEC 60695-2-12 Glow Wire Ignitability Temperature / 热灯丝焚烧温度, 1.0 mm 825 °C IEC 60695-2-13 Oxygen Index / 极限氧指数 35 % ISO 4589 UV-light, water exposure/immersion�����app.txt / 紫外线表露，耐水/浸渍 F1 – UL 746C
