河北宏旭 预制井室钢模具 井室钢模具 河流**护坡模具

河北宏旭  预制井室钢模具  井室钢模具  河流**护坡模具

The steel mould manufacturer of the steel mould for the circular well chamber is determined according to the specific model of the concrete well chamber. In the production of the concrete well chamber, the formwork removal method is often adopted. If the inner diameter is small, the manufacturing method of drawing the formwork will be adopted. At present, more and more round well chamber steel mould is used. The inner diameter of the steel mould for well chamber is generally 4mm, 5mm and 6mm. However, the size of these dies produced by our company is not fixed. Our company can produce round inspection well mould with various sizes of inner diameter according to different needs of different customers Some details should also be paid attention to when the steel mould for well chamber is used, because for the convenience of use, the steel mould for round well chamber is adopted The steel mould of the well chamber can be disassembled, so it is necessary to assemble these molds with screws when using. Attention should be paid to tightening when assembling. Do not disconnect the die due to insufficient assembly during filling. In this way, a lot of raw materials will be wasted A layer of oil should be applied on the surface of the well chamber steel mold when it is used. The purpose of oil painting is to reduce the friction of the die surface and make the surface more smooth. When the product is separated from the product, the product can be easily separated from the �����app.txtmold when the mold is disassembled. When the mold is disassembled, the outer membrane is made of two pieces, and the inner mold is made of three pieces, and the size of the three pieces of inner membrane is different In this way, it is easier to take out the mold when separating the products, so as to reduce the time consumed by separating the products, so that more products can be obtained in a shorter time and higher profits can be obtained.